Atlas Copco Air Motors

Product Details:

Air motors are compact and lightweight. An air motor weighs only a quarter as much and occupies only one sixth of the space of an electric motor of equivalent output power. Air motors develop far more power relative to size and weight than most other motor types.
Our air motors are explosion proof certified, in compliance with the European Union's ATEX directive 2014/34/EU. For equipment used in potentially explosive environments.

Product Details:

Low speed, low torque, lubrication free and reversible
Within their working range these motors have a very steep torque curve. Speed and air consumption are relatively constant regard-less of the load.
Stainless steel version:

• 100% Silicon free
• Grease that conforms to Food Grade regulations

Product Details:

Stainless steel version:

• 100% Silicon free
• Grease that conforms to Food Grade regulations

Product Details:

The noise generated by an air motor is mainly caused by the exhaust air of the motor. The noise level increases with speed and is greatest at the free speed. All Atlas Copco motors are supplied with a threaded exhaust port which, to reduce noise levels, can accept a screw in silencer. However, an exhaust hose can also be fitted, and when used with a silencer, it can reduce noise levels even further.

Product Details:

High torque air motors when a real workhorse is needed

Fitted with extra strong planetary gears the high torque air motors provide torques up to 680 Nm. The gears are dimensioned to stand being loaded at full stall torque indefinitely. Despite their strength the high torque air motors are compact compared to solutions with helical or worm gears. Lubrication-free versions are also available. 

 

 

Product Details:

Atlas Copcos stainless steel motors enlarge the field of applications to areas where the environment is corrosive. This can be in the food processing industries where corrosive detergents are used or in the chemical industry where the atmosphere as such is corrosive.

Atlas Copcos stainless steel motors have a clean design. Their smooth surfaces are cylindrical with no pockets where dirt can collect. The motors are easy to clean.

The motors have double seals in Viton at the output shaft to prevent dirt and liquids from entering the motor gears. The seals also prevent the gear lubricant from leaking out. All external parts, including the output shaft, are made of stainless steel. The grease in the motor complies with NSF H1 and FDA 21CFR § 178.3570. For applications where there might be moisture in the compressed air the stainless steel LZB-motors can be equipped with a stainless steel motor cell as an option. With this option the motor becomes 100% stainless, both internal and external.

Product Details:

LZB vane motors are designed to provide high performance and high standards of reliability.

The design of the motor is long and slim. This gives a number of advantages, such as high power-to-volume ratio, low air consumption and long vane life. All motors utilize five vanes, which are supplied with vane air, to ensure excellent starting and low speed performance. Multi-step planetary gears are used to meet the torque and speed requirements of the application, offering high efficiency with compact dimensions.

Shaft Loading:
The maximum allowable loads on a given motor´s output shaft. The relevant load curve code for a motor is stated in the data tables for each specific motor designation, under the ”Shaft load code” column. These values have been calculated for shaft and bearing working lives of 10 million turns. To achieve a working life of 100 million turns, the loading factor must be halved.

Mounting:
Type LZB vane motors may be mounted in any position. To facilitate this, flange and foot mounting are available for each motor.

Connection:

• Non-reversible motor When the compressed air supply is connected to the inlet. If the exhaust air is to be piped away, a hose should be connected to the exhaust outlet. (EXH).
• Reversible motor The compressed air supply should be connected to the inlet that gives the desired direction of rotation. The inlet not in use functions as an additional outlet: it must not be plugged.

Product Details:

Material in parts:

• Back head and front part stainless steel:
• ISO 683/XIII Type 17, SS 14 2346, DIN 17440 X12CrNiS188
• Outgoing shaft and casing/gear rim stainless steel:
• ISO 683/XIII Type 9b, SS 14 2321, DIN 17440 X22CrNi17
• 100% Silicon free
• Grease that conforms to Food Grade regulations

Additional Information:

• Delivery Time: 6-8 WORKING WEEK AFTER REC. PO
• Packaging Details: 3%

Product Details:

High torque and lubrication free

Air motors can be stalled indefinitely without overheating or sustaining any other damage. They can be started and stopped repeatedly to an unlimited extent. Torque, speed and direction of rotation can be changed easily using simple control methods. Output inherently adjusts to match the applied load. Controllable over a wide speed range. Virtually unaffected by hostile environment. Smooth start-up to minimize ”shock” loading on transmission components.

Product Details:

Motors with brake
The most popular vane motors are available with parking brake. This brake is located between the motor and the gear. It is a disc brake that is spring activated when the motor is not running. When the motor is started the brake is released by a built-in pneumatic piston. The brake is used when it is important that the output shaft must not turn when the motor isn’t running and a torque is applied on the shaft.

Product Details:

Direct driven motor is strong, robust, and can be fitted with three different standard flanges, IEC, NEMA and AC (Atlas Copco standard). Choose the size that match the application need and then select the flange that makes the easiest installation. In addition we have one size that is made of Stainless Steel for applications with tough/harsh environments where extra corrosion protection is needed. The running characteristics of this motor type is strong starting torque and very good low speed performance. For applications such as mixers there are versions with spring loaded vane pins to ensure even better starting and low speed performance. The shaft design, with strong bearings allows the motor to be mounted directly on to the drive shaft without the need of extra shaft support that commonly is needed with other motor designs. The lubrication free vanes enables the motor to operate in demanding environments that doesn’t allow oil to be in the air/process. All motors are ATEX certified to allow operations in areas where gas or dust are expected. Depending on the application do select the motor that match the ATEX demands.

Product Details:

LZL Atlas Copco vane motors are designed to give outstanding starting characteristics, and low speed performance. The range is rugged and constructed for a long service life. With proven design, the LZL has been the machine tool builder’s choice for decades.

Product Details:

All our air motors are explosion proof certified for fixtured applications, in compliance with the European Union's ATEX directive 2014/34/EU. For equipment used in potentially explosive environments. The LZL motors with Helical gears are not ATEX certified.

EX-Certified air motors are ideal in hazardous environments where sparks or high outer temperatures might otherwise ignite explosive gases, vapour or dust.

Product Details:

Type LZB vane motors may be mounted in any position. To facilitate this, flange and foot mounting are available for each motor.

Product Details:

Type LZB Atlas Copco vane motors are compact in design, light in weight, and available with a host of different gear ratios to meet a variety of speed and torque requirements. They are particularly suitable for building into handheld machines, or indeed any industrial equipment.

Atlas Copco’s lubrication free air motors are equipped with low-friction vanes, sealed bearings and vented cylinder plates. Since they release no lubricants into the air, they offer a viable drive solution for sensitive processes and hygienic environments where oil contamination would be at best a problem and, at worst, a catastrophe. Both lubrication free vanes and lubricated vanes are available as kits for replacement or conversion.

Product Details:

Brake module, lubrication free and reversible
The brake is activated by spring force and released by air pressure.

LZB vane motors are designed to provide high performance and high standards of reliability. They are characterized by high power output and small physical size.
The design of the motor is long and slim. This gives a number of advantages, such as high power-to-volume ratio, low air consumption and long vane life. All motors utilize five vanes, which are supplied with vane air, to ensure excellent starting and low speed performance. Multi-step planetary gears are used to meet the torque and speed requirements of the application, offering high efficiency with compact dimensions.

Additional Information:

• Delivery Time: 6-8 Working week after rec. po
• Packaging Details: 3%

Product Details:

Incorporated in the year 2007 as a Sole Proprietorship firm at Ahmedabad Gujarat India we Neo Automation are a renowned trader importer and supplier of a qualitative array of Air Hoists  Electric Assembly Tools  Hand Tools Pneumatic Tools  Air Motors  Aluminium Pipes  Blind Rivet Nuts  Blind Rivets  etc. Offered products are sourced from renowned market vendors. These products are well-known for their optimum finish  rust resistance easy installation and perfect strength. Owing to the far-sightedness of mentor Mr. Harsh Solanki  we have been able to satisfy our clients in an efficient manner.

Product Details:

The power motors come in all sizes and are designed to give highest power and still maintain good low speed characteristics. These motors are delivered with lube free vanes and can theretofore operate without lubrication.
Typically these motors are characterized by:

• Reliable starting
• High starting torque and good low speed characteristics
• Wide speed and torque range
• Sturdy, compact construction to withstand rough treatment
• Inlet and outlet port restrictors permit free speed running
• Long working life and easy servicing

Additional Information:

• Delivery Time: 6-8 WORKING WEEKS AFTER REC. PO
• Packaging Details: 3%

Product Details:

Features:

• Leading the industry in development and innovation.
• Offering a comprehensive range of standard air motors.
• A premier supplier of air motors engineered to meet ­customer requirements.
• Delivering orders, on time, to customer schedules.
• Offering a truly worldwide service.

Product Details:

Type LZB Atlas Copco vane motors are compact in design, light in weight, and available with a host of different gear ratios to meet a variety of speed and torque requirements. They are particularly suitable for building into handheld machines, or indeed any industrial equipment.

Atlas Copcos lubrication free air motors are equipped with low-friction vanes, sealed bearings and vented cylinder plates. Since they release no lubricants into the air, they offer a viable drive solution for sensitive processes and hygienic environments where oil contamination would be at best a problem and, at worst, a catastrophe. Both lubrication free vanes and lubricated vanes are available as kits for replacement or conversion.

Product Details:

Material in parts:

• Back head, casing and front part stainless steel: ISO 683/XIII Type 17, SS 14 2346, DIN 17440 X12CrNiS188
• Outgoing shaft and gear rim stainless steel: ISO 683/XIII Type 9b, SS 14 2321, DIN 17440 X22CrNi17
• 100% Silicon free
• Grease that conforms to Food Grade regulations